doth_pwrtgt - Set Maximum Desired Power for Transmission

Number of Input Arguments: 1

Number of Returned Arguments: 0

Default Value: N/A

Resets State Machine After Command: No

This command sets the desired maximum power on the current channel. The minimum of this desired value and the regulatory maximum is used as the true transmission power. The single argument passed into the driver is the desired power level in 0.5 dBm steps.

Example:To set the desired power level on the current channel to be 13 dBm, the following command is used:

myprompt# iwpriv ath0 doth_pwrtgt 26