get_aifs - Get WMM AIFS Parameter

Number of Input Arguments: 2

Number of Returned Arguments: 1

Default Value: N/A

Resets State Machine After Command: No

This command retrieves the AIFS WMM parameter for either the AP or station parameter set. The get_aifs command must be followed by 2 values. The first value is the access class (AC) number as defined in Table . The second value indicates whether to retrieve the value from the AP or station parameter set. A value of 0 indicates the AIFS value is from the AP parameter set. A value of 1 indicates the AIFS value is from the station parameter set.

Example:The following command gets the AIFS value in the station parameter set for the BE AC.

myprompt# iwpriv ath0 get_aifs 0 1
ath0 get_aifs:2