acm - WMM ACM Bit Value

Number of Input Arguments: 3

Number of Returned Arguments: 0

Default Value: Varies

Resets State Machine After Command: No

This command sets the ACM bit value in the WMM parameters for the station parameter set. The acm command must be followed by 3 values. The first value is the access class (AC) number as defined in Table . The second value indicates the ACM bit value is intended for the station parameter set. Thus, the second value should always be 1. The third value is the desired ACM bit value (either 0 or 1).

Example:The following command sets the ACM bit to 1 in the station parameter set for the BE AC.

myprompt# iwpriv ath0 acm 0 1 1