get_acm - Get WMM ACM Bit Value

Number of Input Arguments: 2

Number of Returned Arguments: 1

Default Value: N/A

Resets State Machine After Command: No

This command retrieves the ACM bit value in the current station WMM parameter set. The get_acm command must be followed by 2 values. The first value is the access class (AC) number as defined in Table . The second value indicates the ACM value is from the station parameter set, thus the second value should be 1.

Example:The following command gets the ACM bit value in the station parameter set for the BE AC.

myprompt# iwpriv ath0 get_acm 0 1
ath0 get_acm:0