abolt - Set ABOLT value

Number of Input Arguments: 1

Number of Returned Arguments: 0

Default Value: Varies

Resets State Machine After Command: Yes

This command sets the abolt value used to control the Atheros proprietary features. This is a bitmask where each bit position corresponds to a feature. Setting the bit to 1 enables the feature if hardware is capable. Setting the bit to 0 disables the feature. The bitmask is described in Table 

Table: Abolt Bit Position Definitions

Bit Position	Feature
1	Static Turbo G (disabled)
2	Dynamic turbo
3	Compression
4	Fast Frames
5	Bursting
6	WMM based cwmin/cwmax/burst tuning
7	XR
8	AR